Korg Bicycle PS60 Manual Do Utilizador
MFX1 (Mod.) (Master Effect1–Modulation) List No Effect
117
MFX1 (Mod.) (Master Effect1–Modulation) List
No Effect
Select this if you donʹt want to use an effect. If selected for a
master effect, the output will be muted.
master effect, the output will be muted.
St.Chorus (Stereo Chorus)
This effect adds depth and warmth to the sound by
modulating the delay time of the input signal. Modulation is
produced by opposite‐phase LFOs for the left and right
sides, creating a more spacious chorus effect.
modulating the delay time of the input signal. Modulation is
produced by opposite‐phase LFOs for the left and right
sides, creating a more spacious chorus effect.
Depth
Separately from the LFO modulation depth, you can also
adjust the depth of the chorus effect by editing the effect
level. Use the MOD Send level and the Return 1 level to
make adjustments.
adjust the depth of the chorus effect by editing the effect
level. Use the MOD Send level and the Return 1 level to
make adjustments.
Feedback
Normally you will leave this set at zero, but by raising this
value, you can produce a flanger effect with longer delay
times.
value, you can produce a flanger effect with longer delay
times.
St.Flange (Stereo Flanger)
This effect produces an intense modulation and a sense of
pitch movement. It is effective when applied to sounds that
contain numerous overtones. For stereo input, the left and
right sides of the flanger output are independent.
pitch movement. It is effective when applied to sounds that
contain numerous overtones. For stereo input, the left and
right sides of the flanger output are independent.
Depth
Separately from the LFO modulation depth, you can also
adjust the depth of the flanger effect by editing the effect
level. Use the MOD Send level and the Return 1 level to
make adjustments.
adjust the depth of the flanger effect by editing the effect
level. Use the MOD Send level and the Return 1 level to
make adjustments.
Vntg.Cho/Flg (Vintage Chorus/
Flanger)
Flanger)
This models the sound of two popular vintage effects, an
analog chorus and an analog flanger. It produces the warm,
rich sound that is characteristic of an analog effect.
Low feedback levels produce a tone thatʹs appropriate for
chorus, and raising the feedback level will automatically
switch to a tone thatʹs appropriate for flanger, meaning that
you can obtain a broad range of sounds from chorus to
flanger simply by adjusting three knobs. This is a modeling
effect.
analog chorus and an analog flanger. It produces the warm,
rich sound that is characteristic of an analog effect.
Low feedback levels produce a tone thatʹs appropriate for
chorus, and raising the feedback level will automatically
switch to a tone thatʹs appropriate for flanger, meaning that
you can obtain a broad range of sounds from chorus to
flanger simply by adjusting three knobs. This is a modeling
effect.
Depth
Separately from the LFO modulation depth, you can also
adjust the depth of the phaser effect by editing the effect
level. Use the MOD Send level and the Return 1 level to
make adjustments.
adjust the depth of the phaser effect by editing the effect
level. Use the MOD Send level and the Return 1 level to
make adjustments.
Full
parameter
parameter
Quick
parameter
parameter
Value
Explanation
Rate [Hz]
←
0.02...10.00
LFO speed
Depth
←
0...100
LFO modulation
depth
depth
Feedback
←
0...100
Feedback amount
Chorus
Chorus
Left
Right
Feedback
180[degree]
Stereo In - Stereo Out
Rate
LFO
Depth
Full
parameter
parameter
Quick
parameter
parameter
Value
Explanation
Rate [Hz]
←
0.02...10.00
LFO speed
Depth
←
0...100
LFO modulation
depth
depth
Feedback
←
0...100
Feedback amount
Full
parameter
parameter
Quick
parameter
parameter
Value
Explanation
Rate [Hz]
←
0.02...10.00
LFO speed
Depth
←
0...100
Modulation depth
Feedback
←
0...100
Feedback amount
Flanger
Flanger
Left
Right
Feedback
Stereo In - Stereo Out
Rate
LFO
Depth
Left
Right
Mono In - Mono Out
+
Chorus / Flanger
Feedback
Depth
Rate
LFO