Lucent Technologies Definity Enterprise Communications Server 555-230-220 Manual Do Utilizador
ASAI-Ethernet
Issue 7 May 1998
13-5
Physical Connectivity for MAPD
The MAPD system assembly that provides the DEFINITY LAN Gateway brouter
application is a single circuit pack [a Multi-Application Platform for DEFINITY
(TN801) ] that provide a processor, a hard disk, a PCMCIA disk, an Ethernet, and
serial ports. See Figure 13-3.
application is a single circuit pack [a Multi-Application Platform for DEFINITY
(TN801) ] that provide a processor, a hard disk, a PCMCIA disk, an Ethernet, and
serial ports. See Figure 13-3.
Figure 13-3.
MAPD System Assembly in a DEFINITY ECS Carrier
The system assembly is inserted into a DEFINITY ECS carrier using three
contiguous slots. Before being placed in the ECS carrier, the DEFINITY ECS can
be administered using the change circuit-packs cabinet command.
contiguous slots. Before being placed in the ECS carrier, the DEFINITY ECS can
be administered using the change circuit-packs cabinet command.
Carrier Connectivity for MAPD
Starting with the DEFINITY Release 5, the system assembly is recognized as the
MAPD Board, and the display circuit-packs cabinet command shows the
assembly occupying the selected slots.
MAPD Board, and the display circuit-packs cabinet command shows the
assembly occupying the selected slots.
For example, in Figure 13-3, the MAPD Board occupies slots 18 through 20. Slot
20 should be administered as a MAPD Board (TN801), and DEFINITY ECS
administration software will prevent slots 18 and 19 from being administered for
other circuit packs.
20 should be administered as a MAPD Board (TN801), and DEFINITY ECS
administration software will prevent slots 18 and 19 from being administered for
other circuit packs.
TN
8
0
1
20
19
18
17