Hughes AN6-098P Manual Do Utilizador

 

4. Tighten the nuts. 

Attach the upper and lower mounting brackets to each other, as 
shown in Figure 33:

1. Place the radio assembly (attached to the upper bracket in 

previous steps) onto the lower bracket.

2. Align the four mounting holes on the upper and lower 

mounting brackets.

3. Insert a ¼-20 × 0.75-inch carriage bolt through each of the 

four mounting holes.

4. From below, place a ¼-inch flat washer, lock washer, and hex 

nut on each bolt.

Figure 32:  Attaching the radio assembly to the feed support tube

5/16-18 x 2.5-inch

carriage bolts

Feed support tube

T0172015

Mounting adapter

Lower mounting bracket

Match oval slot in adapter
to oval slot in tube.

Match round hole
in adapter to round
hole in tube.