HPP Enterprises PHOTOSMART C4700 Manual Do Utilizador

Cause: When printouts are stacked on top of a photo before the ink is completely
dry, some color distortion may occur in the photo.

Use this section to solve these memory card problems:

•

•

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

•

•

•

Solution: Turn the memory card so that the label faces up and the contacts are
facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Cause: The memory card was inserted backwards or upside down.
If this did not solve the issue, try the next solution.

Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, an error message will appear on the display.
Remove the additional memory card to resolve the problem.
Cause: Multiple memory cards were inserted in the product.
If this did not solve the issue, try the next solution.

Solution: Check the computer screen for an error message telling you that the
images on the memory card are corrupted.

Memory card troubleshooting

65