High End Systems High End LCD Controller for Studio Color Manual Do Utilizador
Studio Color LCD Controller
IBM-Compatible 7-15
7
Initial Setup
You must follow the procedure below backing up controller
memory to a personal computer, or restoring pages,
memories and presets from a personal computer to the
controller.
memory to a personal computer, or restoring pages,
memories and presets from a personal computer to the
controller.
1.
Toggle the controller’s
<Standby>
key until the Standby LED
comes ON.
2.
If you are currently running Windows, exit to a DOS prompt.
3.
Insert the backup diskette shipped with the controller into
your computer’s floppy diskette drive. Type one of the
following commands, followed by
your computer’s floppy diskette drive. Type one of the
following commands, followed by
<Enter>
:
A:LWBACKUP
B:LWBACKUP
B:LWBACKUP
4.
If an error message appears notifying you that a serial port
cannot be accessed, select the “Ignore” option to continue.
cannot be accessed, select the “Ignore” option to continue.
5.
The Lightwave Research Backup main menu then appears:
Figure 7-3. Lightwave Research Backup main
menu.
menu.
Help
Controller -> Computer
Computer -> Controller
Setup
Exit
Controller -> Computer
Computer -> Controller
Setup
Exit
Lightwave Research Backup, Ver. 2.0, Copyright 1992
Press F1 at any time for help.