Hitachi Car Video System lcd monitor Manual Do Utilizador

W

X

Auto Tuning

Mode

Select the channel entry method between position setting or direct setting. 
And press the OK button to fix it.
• If [Position] is selected, the screen display will be numbers (1~199 and 

AV00).

• If [Direct] is selected, the screen display will be C

** at the channel 0~99 

and S

** at the channel 100~199.

Search

Press the OK button and it starts the auto tuning.

Manual Tuning

 

Position

Set the position number (1~199 and AV00) or channel number (C

**, S**) by

 

( + ) ( - ) CHANNEL UP/DOWN button.

Frequency

• If [Position] has been selected, search the frequency here by pressing 

W and X buttons.

• If [Direct] has been selected, this function will be not available (grayed out).

Name

This is used to input the name of the TV station within 5 letters. After fixing 
the cursor on the first digit, select a letter by 

T and S SELECT buttons and 

move to next digit by 

X ADJUST button. Press the OK button again after 

finished.
• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank), ”,”(comma) and 

”.”(period).

Sound System

Select the sound system through the 5 different settings.

Color System

Select the color system through the 5 different settings.

Skip

If this is set to On, that position will be skipped while selecting positions by 
CHANNEL UP/DOWN button.
This is automatically set to On for those non-broadcasting channels.

NR

If this is set to On, it helps to reduce the noise interference visible on the 
screen, especially in the weaker signal reception areas.

Antenna Att

If this is set to On, it helps to reduce the noise inter ference visible on the 
screen in case of strong airwave.

Fine Tuning

Decreasing the frequency data 
for the main tuner

Increasing the frequency data for 
the main tuner.

After completing the fine-tuning, press the RETURN button to exit this mode.
• The variable range is -56 ~ +56.

Sort

(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)

(A Line of position List)

Press OK button at a line that is required to change order, then the 
characters will change to green. And move it up or down in the list by 
pressing 

S and T SELECT buttons. And press OK button to complete it. 

Press the RETURN button to exit.

Teletext Language

Select the teletext language, depending on the area utilized, through  the 4 
settings; West Europe, East Europe, Cyrillic and Greek/Turkish.
• Select West Europe when watch in Singapore, Australia, Malaysia, and so 

on.

Auto Off

If this is set to On, the power will be turned off when there is no transmission 
signal and no operation for about 10 minutes in the TV mode.

OPERATING INSTRUCTIONS (continued)

SETUP MENU (TV mode) (continued)