Hitachi Car Video System lcd monitor Manual Do Utilizador

A2 / NICAM / Sound Multiplex (TV mode)

• The CH I / II button is only useful for NICAM and sound multiplex signals.

Otherwise pressing this button will have no effect.

BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears in yellow as shown on right.

Press the CH I / II button to select the sound to be heard.

Each time the button is pressed, I, II or (force mono) appear cyclically on the screen.
When receiving NICAM signals, NICAM display will appear as below.

STEREO sound broadcast
When a stereo program is received, sound mode display will appear in red, and you can
press the CH I / II button to select between stereo and mono sound.

Each time the button is pressed,

or (force mono) appear cyclically on the screen.

When receiving NICAM signals, NICAM display will appear as below.

Monaural sound broadcast
When a monaural program is received, sound mode display will appear in green.
You can press the CH I / II button to select the sound mode between monaural and forced

mono (sound is same).

Each time the button is pressed, or (force mono) appear cyclically on the screen.

OTHER FEATURES (continued)

NOTE

• If sound signal is not strong enough for quality reception, press the CH I / II button until appears on the screen to receive a clear

mono sound.

• If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the CH I / II button until

appears on the screen to receive a clear mono sound.

Audio Switching

NICAM [II]

[I]

[II]

NICAM [I]

NICAM [II]

Sound multiplex signal received

NICAM signal received

Yellow

Green

Yellow

Green

Yellow

Select I, II or (force mono) to hear the CH I, CH II or MONO broadcast respectively.

NICAM

Sound multiplex signal received

NICAM signal received

Green

Red

Select

(force mono) to hear the STEREO or MONO broadcast respectively.