Garmin PDAs & Smartphones G1000 Manual Do Utilizador
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
104
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key (Figures 4-9, 4-10, and 4-11).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1)
From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the
appropriate softkey.
appropriate softkey.
2)
Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-11).
3)
Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4)
Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Figure 4-9 Frequency Auto-Tuning from the MFD
Turn the
FMS
Knob to Scroll
Through a List
of Frequencies
Press the
ENT Key to
Load a Highlighted
Frequency into
the COM Standby
Frequency Box
Or
:
1)
On the Nearest Airports, Frequencies, or Airspaces page, press the MENU Key to display the page menu.
2)
Turn the large FMS Knob to scroll through the menu options.
3)
Press the ENT Key to place the cursor on the desired selection.
4)
Scroll through the frequency selections with the FMS Knob.
5)
Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
6)
Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Figure 4-10 Nearest Pages Menus
Nearest Airspaces Menu
Nearest Airports Menu
Nearest Frequencies Menu