Avaya Sun Fire V880 Instrução De Instalação

5. Rotate the CPU/Memory board ejection levers out so that the CPU/Memory board 

connectors disengage from the motherboard. See the following figure.

6. Pull the CPU/Memory board from the chassis.

7. Place the CPU/Memory board on an antistatic mat or in an antistatic bag.

This section describes the procedures used to replace memory on a CPU/Memory board 
that you have already removed from the system (see 

page 139). The board contains 4-GB of memory. When replacing memory modules, you 
must replace modules in groups of four within a bank of memory.

Tip:

The procedure for replacing memory is summarized on the top of the CPU/
Memory board.

To replace memory modules:

1. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and 

attach the other end to your wrist. See 

information.