Avaya Sun Fire V880 Instrução De Instalação

OpenBoot Diagnostics (OBDiag) is a menu-driven diagnostic tool that diagnoses system 
hardware.

OBDiag performs root-cause failure analysis on the referenced devices by testing internal 
registers, confirming subsystem integrity, and verifying device functionality.

To use the OpenBoot diagnostic tests:

1. From the root login, turn off CMS.

2. Enter:

The system shuts down and the ok prompt is displayed.

3. Enter:

This loads the test program and the test menu is displayed.

4. Enter:

See the following table for a summary of OpenBoot Diagnostic test commands.

1

SUNW,hme@0,1

●

Resets the Ethernet channel.

●

Performs Ethernet channel engine internal loopback.

●

Enables the LAN data to be routed back to the receive 
MII data outputs.

●

Enables MII transmit data to be routed to the MII 
receive data path.

●

Forces the twisted-pair transceiver into loopback mode.

2

SUNW,isptwo@4

Tests the external SCSI interfaces.

3

SUNW,m64B@13

Tests the video monitor port.

4

SUNW,qlc@2

Tests the registers of the on-board FC-AL controller and 

subsystem (Loop A).

5

bbc@1,0

Tests all writable registers in the boot bus controller and 

then verifies that at least one processor has boot bus 

access.

6

bbc@1,500000