Avaya Sun Fire V880 Instrução De Instalação

The HSI/P cards may appear to be faulty when they just need to be reseated in the PCI 
slot. Before you replace the card, try reseating the card.

To reseat an HSI/P card:

1. Log in to the system as root.

2. Enter:

This shuts down the system.

3. Press and release the front panel power button to turn off the system.

Wait for the front panel Power/OK LED to turn off.

4. Turn the key switch to the Forced Off position. See the following figure.

!

DANGER:

Be sure to turn the key switch to the Forced Off position before handling any 
internal components. Otherwise, it is possible for a user to restart the 
system remotely while you are working inside it. The Forced Off position is 
the only key switch position that prevents an RSC user from restarting the 
system.

5. Open the left door.

6. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and 

attach the other end to your wrist. See 

information.

7. Disconnect the HSI/P quad cable connected to the card.

8. Carefully pull the card from the I/O board.