Avaya Sun Fire V880 Instrução De Instalação

A Dual Ethernet and Dual SCSI card supports ethernet and SCSI connections. 

Note:

The older versions of the Dual Ethernet and Dual SCSI cards do not support 
hot-plug operation. You must shut down the system and turn off power 
before installing or replacing a card. If you are replacing a newer card that 
does support hot-plug operation, see 

To replace older Dual Ethernet and Dual SCSI cards:

1. Log in to the system as root.

2. Enter:

This displays the PCI card configuration before you replace a card. Recheck the 
configuration after you have replaced the card.

3. Enter:

This shuts down the system.

4. Press and release the front panel power button to turn off the system.

Wait for the front panel Power/OK LED to turn off.

5. Turn the key switch to the Forced Off position. See the following figure.