Avaya Sun Fire V880 Instrução De Instalação

24. Enter:

This reboots the system so that it recognizes the new HSI/P cards.

Note:

Sometimes the system fails to recognize a newly installed HSI card. If this 
happens, the command show-devs does not show the HSI card and /
var/adm/messages

 fails to recognize the card upon bootup. See the 

troubleshooting chapter of Avaya Call Management System Switch 
Connections, Administration, and Troubleshooting for information about 
troubleshooting HSI/P cards.

25. When the system comes back up, log in as root.

26. Enter:

This displays the PCI card configuration after you add the card. Make sure that the 
new card is displayed.

27. Continue with 

Use the following procedures in the CMS software installation, maintenance, and 
troubleshooting document to: 

●

Install the HSI/P software

●

Reinstall the Solaris patches

After installing the software and patches, continue with 

To change the switch link administration for each ACD:

1. Enter:

The CMS Services menu is displayed.

2. Select the run_cms option.

3. Turn off CMS.

4. Enter:

The CMS Services menu is displayed.