BMW 2008 528xi Sedan Manual Do Proprietário

Página de 288
Opening and
 closing
40
Malfunction
The comfort access function may malfunction 
due to local radio waves. Then open or close the 
vehicle with the buttons on the remote control 
or with a key. To start the engine following this, 
insert the remote control in the ignition lock.
When unlocking or locking/comfort closing do 
not simultaneously grasp the door handle and 
touch the surfaces, arrow
2 or 3. Otherwise, you 
may limit the function.
Replacing battery
If the battery of the remote control is dead, a 
message will appear in the Control Display.
1.
Remove integrated key from remote con-
trol, refer to page
28
.
2.
Remove cover.
3.
Lay in new battery with positive side facing 
upward.
4.
Press cover closed.
Return used battery to a recycling collec-
tion point or to your BMW center.
<
Windows
To prevent injuries, exercise care when 
closing the windows and keep them in 
your field of vision until they are shut. 
Always take along the remote control when you 
leave the vehicle, otherwise children could, for 
example, operate the windows and injure them-
selves.
<
Opening, closing
>
Press switch to resistance point: 
The window continues to open as long as 
you keep the switch pressed.
>
Press switch beyond resistance point: 
The window opens automatically. Pressing 
the switch again stops the opening move-
ment.
You can close the windows in the same manner 
by pulling the switch.
Separate switches for the rear windows are 
located in the rear.
For information on using the convenient opera-
tion at the door lock or with the remote control, 
refer to page
.
For information on comfort closing with comfort 
access, refer to page
.
After switching off ignition
You can still operate the windows with the 
remote control removed or the ignition 
switched off for approx. 1 minute, as long as 
neither of the front doors has been opened.
Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG