BMW 2008 528xi Sedan Manual Do Proprietário

 51

the word CENTER is intended exclusively for 
use by passengers riding in the center position.

When subjected to strain due to an acci-
dent or in the event of damage, replace 

the safety belts, the belt tensioners, and any 
child restraint systems and have the belt anchor 
points checked. Only have this work carried out 
at a BMW center or at a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise cor-
rect operation of this safety equipment is not 
guaranteed.

<

The appearance and arrangement of the but-
tons may vary depending on the equipment.

1 Seat heating, three LEDs
2 Seat heating, one LED
3 Seat heating with active seat ventilation

Press the respective button once per tempera-
ture level. The temperature level is shown on 
the Control Display with buttons

2 and 3. 

The maximum temperature is supplied when 
three LEDs are lit.
The temperature is reduced and if need be, the 
heating is switched off in order to reduce the 
load on the battery. The LEDs remain lit.
To switch off: press button longer.

The heat output can be distributed variously in 
the seat cushion and the backrest.
iDrive, for operating principle refer to page

.

1.

Open the start menu.

2.

Move the controller to the left to open "Cli-
mate".

3.

Select "Seat heater distribution" and press 
the controller.

4.

Move the controller to the left or right to 
select "Driver" or "Passenger".

5.

Turn the controller to adjust the distribu-
tion.
The setting is applied.

The heat output can be distributed variously in 
the seat cushion and the backrest.
iDrive, for operating principle refer to page

.

1.

Open the start menu.

2.

Move the controller to the left to open "Cli-
mate".

Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG