BMW 2008 528xi Sedan Manual Do Proprietário

nolo

r co

mfort

, c

nve

e an

Automatic transmission:
You can use HDC in every drive position.

Displays in instrument cluster

1 Display for target speed
2 HDC display

Malfunction in driving-stability control
systems

The warning lamp for the brake system
lights up, together with the indicator
lamps for ABS, DSC and Tire Pressure
Monitor or Flat Tire Monitor. A mes-
sage appears on the Control Display.
The driving-stability control systems
have failed. Conventional braking effi-
ciency remains available without limita-
tions. While you may continue, you
should remember to proceed cau-

tiously and drive defensively while avoiding full
brake applications. The Tire Pressure Monitor
or the Flat Tire Monitor is also malfunctioning.
Have the system checked as soon as possible.

Display of the previously described
malfunction in Canadian models.

The DSC indicator lamp lights up. A
message appears on the Control Dis-
play. A malfunction has occurred in the

DSC and DTC. The stabilizing actions are no

longer available. The vehicle remains opera-
tional. Have the system checked as soon as
possible.

The brake system warning lamp lights
up yellow. A message appears on the
Control Display. The brake assistant is

defective. Have the system checked as soon as
possible.

Display of the previously described
malfunction in Canadian models.

Starting assistant

The starting assistant enables you to start off
conveniently on slopes. The handbrake is not
required for this purpose.

Hold the vehicle with the footbrake.

Release the footbrake and drive off quickly.

The starting assistant holds the vehicle
for approx. 2 seconds after releasing the

footbrake. After releasing the footbrake, begin
to drive immediately; otherwise, the starting
assistant no longer holds the vehicle after
approx. 1 second and your vehicle will start to
roll backward.

Dynamic Drive*

The concept

Dynamic Drive minimizes body roll and opti-
mizes vehicle stability during cornering and
evasive maneuvers.
Dynamic Drive is based on active stabilizers on
the front and rear axles. Suspension compli-
ance adapts to suit driving conditions, varying
from performance-oriented during cornering to
smooth and comfort-oriented when the vehicle
is proceeding in a straight line. During vehicle
operation, the system continuously runs
through closed-loop control cycles lasting only
fractions of a second.
The system assumes operational status each
time you start the engine.