BMW 2008 M3 Convertible Manual Do Proprietário
39
To switch off:
Press button longer.
If you continue driving within approx.
15 minutes, the seat heating is automatically
activated at the previously set temperature.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.
Press button longer.
If you continue driving within approx.
15 minutes, the seat heating is automatically
activated at the previously set temperature.
The temperature is lowered or the heating is
switched off entirely to save on battery power.
The LEDs stay lit.
Seat and mirror memory
You can store and call up two different combi-
nations of driver's-seat and exterior-mirror
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
nations of driver's-seat and exterior-mirror
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
Storing
1.
Switch on radio readiness or the ignition,
refer to page
refer to page
.
2.
Adjust the seat and exterior mirrors to the
desired positions.
desired positions.
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory button
1 or 2: the
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ing, otherwise unexpected seat move-
ment could result in an accident.
<
Convenience mode
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page
on radio readiness, refer to page
2.
Briefly press the desired memory button
1
or
2.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
when you touch a seat adjustment switch or
one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page
tion on or off, refer to page
.
2.
Press the desired memory button
1 or 2
and keep it pressed until the adjustment
process has been completed.
process has been completed.
If the
button was pressed accidentally:
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.
<
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
when you touch a seat adjustment switch or
one of the memory buttons.
Activating/deactivating automatic call-
up
up
For operating principle refer to page
.
1.
Lightly push button
1 in the turn indicator
lever up or down repeatedly until the sym-
Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG