BMW 2006 M6 Coupe Manual Do Proprietário

Página de 227
Opening and
 closing
38
>
Press the switch beyond the resistance 
point:
The window opens automatically. Pressing 
the switch again stops the opening move-
ment.
You can close the windows in the same manner 
by pulling the switch.
For information on using the convenience oper-
ation mode at the door lock or with the remote 
control, refer to page
.
For information on comfort closing with comfort 
access, refer to page
After switching off ignition
You can still operate the windows with the 
remote control removed or the ignition 
switched off for approx. 1 minute, as long as 
neither of the doors has been opened.
Pinch protection system
If the closing force rises beyond a predefined 
threshold during closing, the system will imme-
diately stop moving the window prior to lower-
ing it slightly.
Despite the pinch protection system, 
inspect the window's travel path prior to 
closing it, as the safety system might fail to 
detect certain kinds of obstructions, such as 
thin objects, and the window would continue 
closing.
Pulling the switch beyond the resistance point 
and holding it limits the response of the pinch 
protection system. In this case, the window will 
respond to forces beyond a defined threshold 
by opening only slightly.
If you pull the switch past the resistance point 
again within approx. 4 seconds and hold it there, 
the pinch protection system will be deactivated.
Do not install any accessories in the range of 
movement of the windows, as otherwise the 
pinch protection system will be impaired.
<
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG