BMW 2006 M6 Coupe Manual Do Proprietário
La
mp
s
80
Lamps
Parking lamps/low beams
0 Lights off and daytime running lamps
*
1 Parking lamps and daytime running lamps
*
2 Low beams
3 Automatic headlamp control,
3 Automatic headlamp control,
daytime run-
ning lamps
*
, Adaptive Head Light
*
and
high-beam assistant
*
Parking lamps
In switch position
1, the front, rear and side
vehicle lighting is switched on. You can use the
parking lamps for parking. For lighting on one
side for parking as an additional feature, refer to
page
parking lamps for parking. For lighting on one
side for parking as an additional feature, refer to
page
.
The parking lamps drain the battery. Do
not leave them switched on for long peri-
not leave them switched on for long peri-
ods of time, as otherwise it may no longer be
possible to start the engine.
possible to start the engine.
<
Low beams
The low beams light up in switch position
2 only
with the engine running. Otherwise the parking
lamps are lit.
lamps are lit.
Automatic headlamp control
In the switch position
3, the system activates
the low beams and switches them on or off in
response to changes in ambient light condi-
tions, for instance, in a tunnel, at dawn and dusk
and in case of precipitation. Adaptive Head
Light
response to changes in ambient light condi-
tions, for instance, in a tunnel, at dawn and dusk
and in case of precipitation. Adaptive Head
Light
*
is active. The LED next to the symbol is
illuminated when the low beams are on.
When driving into a tunnel with bright overhead
lighting, switching on of the lights may be
delayed.
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
lighting, switching on of the lights may be
delayed.
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
If desired, the light switch can be left in
the position
the position
3. The exterior lighting is
automatically switched off after switching off
the vehicle.
the vehicle.
The automatic headlamp control cannot
serve as a substitute for your personal
serve as a substitute for your personal
judgment in determining when the lamps
should be switched on in response to ambient
lighting conditions. For example, the system
cannot detect fog. To avoid safety risks, you
should always switch on the lamps manually
under these conditions.
should be switched on in response to ambient
lighting conditions. For example, the system
cannot detect fog. To avoid safety risks, you
should always switch on the lamps manually
under these conditions.
<
Pathway lighting
When you activate the headlamp flasher after
parking the vehicle and switching off the lamps,
the low beams will come on for a brief period.
You can set the duration or deactivate the func-
tion via iDrive.
iDrive, for explanation of principle, refer to
page
parking the vehicle and switching off the lamps,
the low beams will come on for a brief period.
You can set the duration or deactivate the func-
tion via iDrive.
iDrive, for explanation of principle, refer to
page
.
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Vehicle settings" and press the
controller.
controller.
4.
Select "Lighting" and press the controller.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG