BMW 2004 X5 4.4i SAV Manual Do Proprietário

Página de 193
154
n
Lamps and bulbs 
2 Halogen high beams 
H1 bulb, 55 watts 
The bulb is pressurized. There-
fore, wear safety glasses and pro-
tective gloves. Failure to comply with 
this precaution could lead to injury if the 
bulb is accidentally damaged during 
replacement.
<
 
1. Remove the cover
2. Disconnect the plug 
3. Unhook wire spring
4. Remove and replace the bulb. 
530de359
3 Parking and standing lamps 
10 watt bulb: H 10 W
1. Remove the cover
2. Disconnect the plug
3. Turn reflector module with bulb to 
left and remove
4. Replace module with bulb.
Xenon lamps
*
The operating life of these lamp units 
is extremely long and the likelihood of 
failure very low, provided that they are 
not switched on and off a very great 
number of times. If one of these bulbs 
should nevertheless fail, it is possible 
to continue driving with great caution 
using the fog lamps, provided traffic 
laws in your area do not prohibit this. 
To avoid risk of potentially fatal 
injuries: owing to the extremely 
high voltages at which these units oper-
ate, service work should always be 
entrusted to qualified personnel.
<
 
Front turn signal indicators/
side-marker lamps 
S 8 bulb 
Please contact your BMW Sports 
Activity Vehicle center in case of a 
malfunction. 
Side turn signal indicators 
5 watt bulb: W 5 W or WY 5 W
*
1. Use finger pressure against the rear 
end of the lamp, refer to arrow, to 
press it forward for removal 
2. Apply gentle pressure to the bulb 
while turning it to the left and pull it 
out 
3. Replace the bulb.
530de304
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG