BMW 2004 X5 4.4i SAV Manual Do Proprietário

Check Control

Graphic display

The following alerts or status messages
are displayed with icons from ignition
key position 2 and up until the defects
are corrected:

1 Check low beams

2 Add washer fluid, goes out after

approx. 1 minute

3 Door open

4 Tailgate open

5 Check brake and tail lamps. A defec-

tive center brake lamp is indicated by
the upper symbol.

When you open the door after stopping,
a warning signal sounds without a
visual indicator for:

LIGHTS ON

KEY IN IGNITION LOCK.

390de121

Alphanumeric display

Text messages are used to alert the
driver to system malfunctions when the
ignition key is turned to position 2. The
alert is accompanied by an acoustic
signal.

1 Status messages symbol

2 Display

3 CHECK button

Messages concerning system faults are
differentiated based on two priorities:

390us111

Priority 1

These defects are immediately indi-
cated by an acoustic signal and a flash-
ing warning symbol 1. Simultaneous
defects will be displayed consecutively.
These status messages remain in the
display until the defects are corrected.
They cannot be deleted by pressing the
CHECK button 3:

RELEASE PARKING BRAKE

COOLANT TEMPERATURE
Temperature too high. Stop the vehi-
cle immediately and switch off the
engine, refer to pages

and

145

STOP! ENGINE OILPRESS
Oil pressure too low. Stop the vehicle
immediately and switch off the
engine, refer to pages

and

143