BMW 2004 X5 4.4i SAV Manual Do Proprietário

97

n

The front, rear and side vehicle 
lighting is switched on. You can 
use the parking lamps for park-

ing. For lighting on one side for parking 
as an additional feature, refer to 
page 

. 

When the ignition is switched off 
and the low beams are on, only 
the parking lamps – side marker 

lamps – remain on. 

530us215

Pathway lighting:
When you activate the headlamp 

flasher after parking the vehicle and 
switching off the lamps, the low beams 
will come on for a brief period. You may 
also have this function deactivated if 
you wish.

<

Whenever you open the driver's door, 
after having turned the ignition key to 
position 0, you will hear an acoustic 
signal for a few seconds to remind you 
that the lamps have not been switched 
off. 

On vehicles with alphanumeric Check 
Control

:

The reminder is given through the 
Check Control. 

The headlamps are automatically 
switched on for daylight driving at igni-
tion key position 2. 

When you set the switch to this 
position, the system activates 
and switches on and off the low 

beams in response to changes in ambi-
ent light conditions, for instance, in tun-
nels, at dawn and dusk, and in rain and 
snow.

Following automatic activation the 
vehicle's external lighting remains 

on when you switch on the fog lamps.

<

 

Automatic headlamp control can-
not serve as a substitute for the 

driver's judgment in determining when 
the vehicle lamps should be switched 
on. For example, the system cannot 
detect fog. To avoid safety risks, you 
should always switch on the lamps 
manually under these conditions.

< 

You can have the sensitivity of the 
headlamp control system adjusted 

on your vehicle.

<

 

Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG