BMW 2006 X5 4.8is SAV Manual Do Proprietário

116

Integrated universal remote control

Car phone

1. Park your vehicle within the range of

the remote-controlled device

2. Program the integrated universal

remote control as described at the
section on fixed-code hand-held
transmitters

3. Locate the button on the receiver of

the device you want to set up, e.g. on
the upper section of the motor

4. Press the button on the receiver of

the device you want to set up. After
step 4, you have approx. 30 seconds
for step 5

5. Press the programmed memory

button 1 on the integrated universal
remote control three times.

The corresponding memory button 1 is
now programmed with the signal of the
original hand-held transmitter.

If you have any additional ques-
tions, please contact your BMW

Sports Activity Vehicle center.

Clearing memory buttons

It is not possible to clear memory but-
tons 1 individually. To clear all three
memory buttons 1, proceed as follows:

Press both outer buttons 1 of the inte-
grated universal remote control for
approx. 20 seconds, maintaining pres-
sure until the LED 2 starts to flash.

Hands-free system

On vehicles with telephone provisions

the hands-free microphone is located in
the headliner.

For further information on the tele-
phone, refer to the telephone Owner's
Manual.