BMW 2006 X5 4.8is SAV Manual Do Proprietário

Ignition lock

Starting engine

Ignition key positions

0 Steering lock engaged

1 Steering lock disengaged

2 Ignition on

3 Starting engine

Steering lock engaged

The key can only be inserted or
removed in this position.

After removing the key, turn the steer-
ing wheel slightly to the left or right until
you hear the lock engage.

If the key is not removed, an acoustic
signal sounds after the driver's door is
opened.

Automatic transmission:
Only move the selector lever from

position P with the engine running.
To turn the key back to position 0 or to
remove it, first place the selector lever
in position P: interlock.

Steering lock disengaged

Slightly moving the steering often
makes it easier to turn the key from 0
to 1.
Individual electrical devices are ready
for operation.

Starting engine

Manual transmission:
Depress the clutch when starting

the engine. If you do not, a lock pre-
vents the engine from starting.

Before starting

> Engage the handbrake

> Be sure that the gearshift lever is in

Neutral or the selector lever in Park if
the vehicle is equipped with an auto-
matic transmission

> Depress the clutch.

If the clutch is not depressed, the
engine cannot be started

> Press the footbrake with an auto-

matic transmission.

Do not run the engine in closed
rooms, otherwise the inhalation of

toxic exhaust gases can cause uncon-
sciousness and death. The exhaust
gases contain carbon monoxide, an
odorless and colorless, but highly toxic
gas.
Never leave an unattended vehicle with
the engine running, as such a vehicle
represents a potential safety hazard.
To prevent the vehicle from rolling,
always select neutral or the position P
and engage the handbrake before leav-
ing the vehicle with the engine run-
ning.

When starting the engine, do not press
the accelerator pedal.