BMW 2006 X5 4.8is SAV Manual Do Proprietário
79
n
Ov
er
v
iew
Con
tr
o
ls
M
a
in
te
na
nc
e
Re
p
a
ir
s
Da
ta
In
de
x
Check Control
Computer
> TRANS. FAILSAFE PROG
*
> CHECK BRAKE LININGS
Have the brake pads inspected by
your BMW Sports Activity Vehicle
center, refer to page
your BMW Sports Activity Vehicle
center, refer to page
> CHECK COOLANT LEVEL
Coolant too low, top off at the next
opportunity, refer to page
opportunity, refer to page
> ENGINE FAILSAFE PROG
Fault in the engine electronics.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.
Displays after completion of trip
All of the malfunctions registered during
the trip appear consecutively when the
ignition key is turned to position 0.
the trip appear consecutively when the
ignition key is turned to position 0.
The following displays will appear when
appropriate:
> LIGHTS ON
appropriate:
> LIGHTS ON
> KEY IN IGNITION LOCK
> CHECK ENGINE OIL LEV
Replenish engine oil at the next
opportunity, e.g. while refueling, refer
to page
opportunity, e.g. while refueling, refer
to page
This display appears when you open
the driver's door after parking the vehi-
cle. A supplementary acoustic signal
also sounds.
the driver's door after parking the vehi-
cle. A supplementary acoustic signal
also sounds.
Status messages remain available with
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there are multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there are multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.
Checking Check Control
Press the CHECK button 3 with the
ignition key in position 2:
CHECK CONTROL OK appears on the
display.
ignition key in position 2:
CHECK CONTROL OK appears on the
display.
No malfunctions are present in the
monitored systems.
monitored systems.
Computer
You can find a description of the com-
puter below and on page
puter below and on page
as well as
in the Owner's Manual for Onboard
Computer.
Computer.
You can have the Check Control
and computer messages dis-
and computer messages dis-
played in a different language.
<
Mode selection
As of ignition key position 1, you can
request information from the computer
using the computer button in the turn
signal lever.
request information from the computer
using the computer button in the turn
signal lever.
A new function appears each time you
briefly press the computer button.
briefly press the computer button.
The display sequence:
> Outside temperature
> Outside temperature
> Average fuel consumption
> Cruising range
> Average speed.
As of ignition key position 1, the last
active setting is displayed.
As of ignition key position 1, the last
active setting is displayed.
The range of available displays varies
according to your individual vehicle's
equipment.
according to your individual vehicle's
equipment.
53
0d
e
2
28
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG