BMW 2006 X5 4.8is SAV Manual Do Proprietário

Página de 202
96
n
2-axle self-leveling suspension
*
The concept 
Your vehicle is equipped with 2-axle 
self-leveling suspension acting on both 
the front and rear suspension. This sys-
tem combines automatic self-leveling, 
which compensates for variations in 
front-to-rear load-distribution patterns, 
with a selection feature allowing drivers 
to choose from among several ride-
height options.
You may choose from among the fol-
lowing ride heights:
> Normal
The standard setting is intended for 
most operating conditions, including 
trailer towing
> Off-Road
Increased level for more ground 
clearance
> Access
Lowers vehicle for more convenient 
cargo handling or easier passenger 
entries and exits.
Changes in ride height are initiated 
either manually, using the control but-
ton, refer to page 97, or automatically in 
response to specific speeds. When the 
ride height is selected manually, the 
driver has the additional option of revis-
ing the ride-height selection by entering 
a new command during the adjustment 
process.
When the vehicle is stationary, the sys-
tem executes ride-height changes in 
both directions – up and down – when-
ever the doors are closed. The tailgate/
liftgate may be open. The system raises 
the vehicle only when the engine is run-
ning.
The system's automatic self-leveling 
feature automatically compensates for 
variations in the vehicle's load.
The ground clearance of the vehicle 
6.5-9 in/16.5-22 cm, depending on the 
level selected.
Frequent changes in ride height 
initiated at short intervals can 
overheat the compressor, causing the 
system to briefly suspend active opera-
tion.
<
Self-leveling suspension display 
1 Off-Road
2 Standard
3 Access
The LEDs not only show the current ride 
height, but also indicate changes:
> LED on: indicates the vehicle's cur-
rent ride height
> Ride-height LED flashes while the 
LED for the earlier level remains on: 
the ride height is being adjusted to a 
new level, either automatically or in 
response to driver input at the button.
When the suspension reaches the new 
ride height the flashing LED reverts to 
continuous operation, and the LED for 
the earlier level goes out.
53
0d
e
2
18
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG