Spracht CP-2012 Manual Do Utilizador

Microphone switch to turn on 

Tone/pulse switch to select

2, 3 or all 4 built-in microphones

telephone dialing mode

Green LEDs (one by each active 

4 red LEDs (one by each microphone) 

microphone) indicates unit is on

indicate mute is activated

RJ-45 for telephone interface cable

1 RCA jack for connection to

2 RJ-22 jacks for external mics

external recorder (not supplied)

15 VDC; 120 VAC adapter supplied (input 120 VAC 60 Hz, output 900mA at 15 VDC)

Standby: 110 ± 10 mA

Operation: 220 mA and above

5W at 8

1

4 internal microphones: -47 ± 4 dB

Speakerphone (main body)

13.75 inch (350 mm) diameter

Comes with 20 ft (6 m) RJ-45 cable

1 lb. 10 oz. (740 g)

Both analog and digital

15 VDC for power adapter

RJ-45 cable to conference phone

Analog

RJ-11 for telephone line

RJ-11 for external telephone (neither 

cable nor telephone supplied)

Digital

RJ-22 for telephone handset

RJ-22 cable connection to handset jack

4.6 in. wide x 1.6 in. tall x 1 in. deep (118 x 45 x 25 mm)

1.9 oz. (53 g)

May be mounted by telephone jack

Note: Data apply for both analog and digital telephone system interfaces unless otherwise noted.

Comes with 70 in. (1.8 m) cable with RJ-22 connector

-47 ±4 dB

2.4 oz. (69 g)