Yamaha SP2060 V1 Manual Do Proprietário
Ref
erences
Intr
oduction
to the SP2060
Fore
w
o
rd
The Contr
ols
and Connector
s
Netw
ork Settings
P
anel Operation
SP2060 Owner’s Manual
23
Basic Operation
Changing the parameter values
You can adjust the parameter settings, such as EQ, according
to the speaker response or the acoustic environment of a par-
ticular venue. This section explains how to change the delay
time for Output channel 1 as an example.
to the speaker response or the acoustic environment of a par-
ticular venue. This section explains how to change the delay
time for Output channel 1 as an example.
1.
Display the parameter setting you wish to
change. To change the delay time, first press
the [DELAY] key to switch to the Delay
display.
change. To change the delay time, first press
the [DELAY] key to switch to the Delay
display.
Refer to “The Controls and Connectors” on page 21 for
information on the relationship between the parameters
and keys.
information on the relationship between the parameters
and keys.
2.
Select a channel for which you wish to
change the delay time. In this example, press
the OUTPUT 1 [SEL] key.
change the delay time. In this example, press
the OUTPUT 1 [SEL] key.
3.
Press the [NEXT] key repeatedly until the
parameter you wish to change appears on the
screen. In this example, select the Time
parameter.
parameter you wish to change appears on the
screen. In this example, select the Time
parameter.
4.
Press the [
▲ INC]/[▼ DEC] keys to change the
parameter value.
The parameter value on the screen changes accordingly.
This section describes the function of the panel keys and re-
lated displays.
lated displays.
Some parameters will prompt you to confirm the operation
to reflect the change in the value.
In this case, a confirmation icon will appear on the display.
Press the [NEXT] key to move the cursor to the icon, then
press the [YES] key. A message prompts you to confirm.
Press the [YES] key to confirm the operation.
to reflect the change in the value.
In this case, a confirmation icon will appear on the display.
Press the [NEXT] key to move the cursor to the icon, then
press the [YES] key. A message prompts you to confirm.
Press the [YES] key to confirm the operation.
LEVEL
You can view and adjust the Input and Output channel lev-
els.
els.
1.
Press the [LEVEL] key to select the Level
display.
display.
2.
Press the [SEL] key for the target channel.
The corresponding channel is selected. The [SEL] key
LED for the selected channel lights up.
LED for the selected channel lights up.
3.
Press the [
▲INC]/[▼DEC] keys to adjust the
input or output level.
Panel Operation
[
▲ INC]
key
Press the [
▲ INC]
key.
The value increases.
Hold down the
[
[
▲ INC] key.
The value continues to
increase as long as you
hold down the key.
increase as long as you
hold down the key.
While holding down
the [
the [
▲ INC] key,
press the [
▼ DEC]
key.
The value continues to
increase at a rate more
rapid than when you hold
down the [
increase at a rate more
rapid than when you hold
down the [
▲ INC] key.
[
▼ DEC]
key
Press the [
▼ DEC]
key.
The value decreases.
Hold down the
[
[
▼ DEC] key.
The value continues to
decrease as long as you
down the key.
decrease as long as you
down the key.
While holding down
the [
the [
▼ DEC] key,
press the [
▲ INC]
key.
The value continues to
decrease at a rate more
rapid than when you hold
down the [
decrease at a rate more
rapid than when you hold
down the [
▼ DEC] key.
OUT 1
ON/OFF = ON
ON/OFF = ON
OUT 1
TIME = 2.67ms
TIME = 2.67ms
Parameter
Range
INPUT A/B/SUM
–
∞
, –138.00 through +10.00dB
OUTPUT 1-6
–
∞
, –138.00 through +10.00dB
NOTE
When INPUT A/B LINK is turned On, the parameters for
channels A and B are linked and set to the same value
automatically.
channels A and B are linked and set to the same value
automatically.
SCENE EDIT
01:FOH(Event A)
01:FOH(Event A)
Confirmation icon
Cursor
IN A
LEVEL =-138.00dB
LEVEL =-138.00dB
IN B
LEVEL =-138.00dB
LEVEL =-138.00dB
IN B
LEVEL =-138.00dB
LEVEL =-138.00dB