Viper VSS4000 Instrução De Instalação

ADVSS4000 2009-09

Addendum: Installation Guide

! ATTENTION INSTALLER !

The VSS4000 integrates the Viper 5101 Remote Start with the VSM100 Viper SmartStart Module. Read this addendum

and both installation guides thoroughly before beginning. They will help you understand how to combine the two

systems, avoid mistakes, and smoothly complete the installation, verification and customer registration processes.

The corrections made in this addendum address the 5101 installation guide (N4102V 2008-06) as it pertains to the

VSN4000 kit.

Installation guide

Page #

Description/error

Correction

Inside front

cover & 31

Error is found in the Bitwriter® chip ver-

sion requirement: version 2.5

The Bitwriter (p/n 998U) requires chip version 2.6

or newer to program this unit.

What is included:

This list has changed to integrate two

systems, see Correction column.

The VSS4000 system includes:

One - 5101V remote start/keyless entry main

module, Owner's & Installation guide, QR Wiring

guide, (and supporting documentation).

One - five-button /1-way Supercode remote con-

trol (p/n 7153V)

One - Control Center with integrated Valet Over-

ride switch

One - Shutdown toggle switch

One - VSM100 Viper SmartStart module, wire

harness, Quick reference User's & Installation

guide. Module ID stickers.

Step 1 reads:

Hold....until you hear it emit a long

beep. The transmit LED comes on solid.

Should read:

1. Hold the

A U

button on the remote until the

transmit LED lights solid (approx. 10 seconds).

2. Press and hold the

A U

button until the LED

blinks three times and then lights solid.

Remote starting diagnostics correction to

introduction paragraph

Should be:

A few select system conditions may prevent the en-

gine from starting. The condition that causes this

non-start will be reported by flashing the vehicle

parking lights. The number of flashes and the list

below identify the condition.