Unisar BR101 Manual Do Utilizador

into the ear to allow the  
probe tip to continuously 
scan the ear canal.  This 
will ensure an accurate 
temperature measurement 
(See Fig. 4). After one 
second release the 
POWER/SCAN button 
for a temperature reading.

5. A beep will indicate the

end of the temperature
measurement. (See Fig. 5).
Remove thermometer from 
ear canal and view the 
temperature.

7. A smiling face will

appear in the display to
indicate a temperature
lower than 100.4°F/38°C

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

4. Keeping the POWER/SCAN button

depressed, insert the probe into the ear
canal.  The probe must be inserted well

1. Press and realease the    

POWER/SCAN button   
and the system will start 
its self-testing cycle
(See Fig. 1).

2. Once the self-testing is

completed, the display 
will show the last temper-   
ature recorded. (See Fig. 
2). This indicates that the 
thermometer is ready for 
you to use.

3. Press the POWER/SCAN

button without releasing
it so it will perform the
automatic scanning
sequences. The word Lo
may appear indicating
the temperature
registering is lower than
93.2°F/34°C (See Fig. 3).

6. To change the reading from Celsius to

Fahrenheit, press the POWER/SCAN
button without releasing it and then
press the MEM button.

Figure 6