Yamaha DVD-C961 Manual Do Proprietário

1

Connect to the 6-channel input jacks of your AV 
receiver (see page 10).

2

Connect to the audio input jacks of your AV 
receiver or stereo system (see page 10).

3

Connect to the coaxial input jack of your AV 
receiver (see page 9).

4

Connect to the optical input jack of your AV 
receiver (see page 9).

5

Switches the remote control on or off.
When using REMOTE CONTROL (IN, OUT) 
jacks or REMOTE CONTROL (RS-232C) 
terminal, set this switch to ON.

6

Connect to the remote control output/input jack 
of your Yamaha AV receiver/component (see 
page 14).

7

Use as an expansion terminal for commercial use.
Consult your dealer for details.

8

Connect the supplied power cable (see page 14).

9

Connect to the S-video input jack of your AV 
receiver (see page 11).

0

Connect to the composite video input jack of 
your AV receiver (see page 11).

q

Connect to the HDMI input jack of your HDMI 
component (see page 12).

w

Connect to the component input jacks of your 
AV receiver (see page 11).

Do not touch the inner pins of the jacks on the rear 
panel of this unit. Electrostatic discharge may cause 
permanent damage to this unit.

■

The REMOTE CONTROL (RS-232C) terminal is used in custom installation. Do not connect 
any cables to this terminal during normal use.