Yamaha DVD-C961 Manual Do Proprietário

You can customize the various settings of this 
unit using the setup menu.

y

If the setting you have selected are not appropriate, 
you can reset all settings to the initial factory 
settings (see “Resetting the system” on page 40).

Open the battery compartment.

Insert the two supplied batteries (AA, R6, 
UM-3) following the indications (+/–) 
inside the compartment.

Close the cover.

• Insert batteries correctly according to the polarity 

markings (+/–). Batteries inserted in the opposite 
orientation may leak. 

• Replace the exhausted batteries immediately with 

new ones to prevent leakage.

• Remove the batteries from the compartment if the 

remote control is not used for more than a month.

• If the batteries have leaked, dispose of them 

immediately. Avoid touching the leaked material 
or letting it come into contact with clothing, etc. 
Clean the battery compartment thoroughly before 
installing new batteries.

• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as 

alkaline and manganese batteries) together. Read 
the packaging carefully as these different types of 
batteries may have the same shape and color.

• Dispose of the batteries correctly in accordance 

with your local regulations.

Use the remote control within 6 m 
(approximately 20 ft) of this unit and point it 
toward the remote control sensor.

• Do not spill water or other liquids on the remote 

control.

• Do not drop the remote control.
• Do not leave or store the remote control in the 

following types of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a 

heater or stove

– places of extremely low temperature
– dusty places

Make sure the power cable is plugged into 
an AC outlet.

Turn on your TV and AV receiver.

Select the appropriate input source of the 
AV receiver (refer to the manual supplied 
with your AV receiver).

Press 

 on the front panel or 

 

 on the remote control to turn 

on this unit.
➜ The front panel display lights up.

Set the TV to the correct video input (refer 
to the manual supplied with your TV).
➜ The default screen appears on the TV.