Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Siemens
  4. 1015N-2MFM-1A
  5. Manual Do Utilizador

Siemens 1015N-2MFM-1A Manual Do Utilizador

Download
Página de 25
                 A-6
1015N-2MFM-1A
Appendix A
“AT” COMMANDS and ‘S” REGISTERS
EXCLUSIVE TO THE PE2400
Command
Factory Default
Parameters / Descriptlon
%Dn
n = 0
DTMF Attenuation. %Dn command sets the DTMF transmit level attenuation.
n = 0
0 dB attenuation
n =1
2 dB attenuation
n = 2
4 dB attenuation
n = 3
6 dB attenuation
n = 4
8 dB attenuation
n = 5
10 dB attenuation
n = 6
12 dB attenuation
n = 7
14 dB attenuation
%Ln
n = 0
Transmit Attenuation. %Ln command sets the transmit level attenuation.
n = 0
0 dB attenuation
n = 1
2 dB attenuation
n = 2
4 dB attenuation
n = 3
6 dB attenuation
n = 4
8 dB attenuation
n = 5
10 dB attenuation
n = 6
12 dB attenuation
n = 7
14 dB attenuation
Percent (AT%) Commands
Command
Factory Default
Parameters / Descrlptlon
&Dn
n = 0
Data Terminal Ready Option. &Dn controls the Data Terminal Ready (DTR) options.
Parameters: n = 0, 1, 2, 3
n = 0
Modem ignores DTR (factory default)
n = 1
Modem assumes command state when ON-to-OFF transition Is detected
on DTR.
n = 2
Modem hangs up, assumes command state and disables auto-answer
upon detecting ON-to-OFF transition on DTR.
n = 3
Modem assumes initialization state upon detecting an ON-to-OFF transition
on DTR.
Result codes: OK
&Jn
n = 0
Auxiliary Relay Control. &Jn determines how the auxiliary relay is controlled.
Parameters: n = 0.1
n = 0
The auxiliary telco relay is commanded to stay open. Suitable for RJ-11,
RJ-41 S, or RJ-45S type phone jack (factory default).
n =1
The auxiliary telco relay is controlled by off-hook/on-hook. If the modem is
off-hook, the relay is commanded to close (connecting A to A1); if the modem
is on-hook. the relay is commanded to open (disconnecting A  from  A1).
Suitable for RJ-12 or RJ-13 type phone jacks.
Ampersand (AT&) Commands