Sigma EF-530 Manual Do Utilizador

 

 

 

Thank you very much for purchasing the Sigma EF-530 DG SUPER EO-TTL II Electronic Flash. This 
product is specifically developed for the Canon EOS series SLR cameras. Depending on the camera model, 
functions and operation may vary. Please read this instruction booklet carefully. To add to your enjoyment 
of photography, the flash has a variety of features. To make the most of all these 

features and

 to get the 

maximum performance and enjoyment from your flash, please read this instruction 

booklet together 

with 

your camera’s instruction 

manual before 

using the flash, and also keep it handy for your future reference. 

 

 

In order to avoid causing any damage or injury, please read this instruction manual very carefully, 
paying attention to the cautionary signs below, before using the flash.   
Please take special note of the two cautionary signs below. 

 

 

 

 

 

 

Symbol denotes the important points, where warning and caution are required.

 

 

 

Symbol contains information regarding the actions that must be avoided.

 

Using the product disregarding this warning sign might cause serious injury
or other dangerous results. 

 

Using the product disregarding this caution sign might cause injury or
damage.

 

 

This flash contains high voltage circuits. To avoid electric shock or burns, do not attempt to
disassemble the flash. If the outside shell of the unit is broken or cracked, do not touch the
mechanism inside. 

 

Do not fire the flash close to eyes. Otherwise the bright light could damage the eyes. Keep at least
1m/3feet distance between face and the flash 

unit when 

taking a picture with flash.

 

 

Do not touch the synchro terminal of your camera when the flash is attached to 

the

 hot shoe. High 

voltage circuitry could cause 

an

 electric shock.

 

 

Never use your camera in an environment where flammable, burnable, gas, liquids or chemicals, 
etc, exist. 

Otherwise it

 might cause fire or explosion.

 

 

 

 

 

 

 

 

Do not use this flash unit on any camera other than the Canon EOS series 

cameras, otherwise

the 

flash may damage the circuitry of these cameras.

 

 

This flash unit is not waterproof. When using the flash and camera in the rain or snow or near water,
keep it from getting wet. It is often impractical to repair internal electrical components damaged by
water.

 

 

Never subject the flash and camera to shock, dust, high temperature or humidity. These factors
might cause fire or malfunctioning of your equipment.

 

 

When the flash is subjected to sudden temperature change, as when the flash unit is brought from a
cold exterior to warm interior, condensation might form inside. In such a case, place your equipment
in a sealed plastic bag before such a change, and do not use the flash 

unit until

 it reaches room 

temperature.

 

 

Do not store your flash in a drawer or cupboard 

etc. containing

 naphthalene, camphor or other

insecticides. These chemicals will have 

a

 negative effects on the flash unit. 

 

Do not use a thinner, Benzene or other cleaning agents to remove dirt or finger prints from the 
component. Clean with a soft, moistened cloth.

 

 

For extended storage, choose a cool dry place, preferably with good ventilation. It is recommended 
that the flash be charged and fired several times a month, to maintain proper capacitor functioning.