Recoton/Advent AW770 Manual Do Utilizador
4
CONNECT THE TRANSMITTER
Connect the transmitter as follows:
Step 1 Power the Transmitter
1. Insert the power cord from AC Adapter (P)
into the Transmitter Power Input Jack (K).
2. Plug the AC Adapter (P) into any standard
wall outlet.
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left
plugged in and powered at all times. If you will not be using the AW770 for an extended
period of time, you may wish to unplug the AC Adapter.
plugged in and powered at all times. If you will not be using the AW770 for an extended
period of time, you may wish to unplug the AC Adapter.
Step 2 Connect to an Audio Source
O
PTION
1 – C
ONNECTING TO A
S
TEREO
R
ECEIVER
1. Connect the mini plug on the end of the Audio Input
Cable (M) to the mini jack on the “Y” Cable Adapter (Q).
2. Connect the dual RCA plugs on the other end
of the “Y” Cable Adapter (Q) to the RCA-type
audio outputs of a stereo receiver/amp or
other audio source.
audio outputs of a stereo receiver/amp or
other audio source.
O
PTION
2 – C
ONNECTING TO A
T
ELEVISION
1. Connect the mini plug on the end of the
Audio Input Cable (M) to the mini jack on
the “Y” Cable Adapter (Q).
the “Y” Cable Adapter (Q).
2. Connect the dual RCA plugs on the other end of
the “Y” Cable Adapter (Q) to the RCA-type audio
outputs of a TV.
outputs of a TV.
O
PTION
3 – C
ONNECTING TO A
H
EADPHONE
J
ACK
1. Plug the mini plug on the end of the Audio Input
Cable (M) into the headphone jack. As needed
use the Headphone Adapter Plug (R) to convert
the (3.5mm) mini plug to a full-size 1/4" headphone plug.
use the Headphone Adapter Plug (R) to convert
the (3.5mm) mini plug to a full-size 1/4" headphone plug.
WARNING: DO NOT connect the RCA plugs of
the “Y” Cable Adapter to a speaker output on
the audio source. If you use the speaker output
of an audio source to connect the transmitter,
you will permanently damage the transmitter. It
is designed to work with RCA-type line/variable
outputs or headphone outputs only.
the “Y” Cable Adapter to a speaker output on
the audio source. If you use the speaker output
of an audio source to connect the transmitter,
you will permanently damage the transmitter. It
is designed to work with RCA-type line/variable
outputs or headphone outputs only.
Note: For more information on hooking up and using the transmitter with various
ouputs, please see MORE HELPFUL INFORMATION beginning on Page 7.
ouputs, please see MORE HELPFUL INFORMATION beginning on Page 7.
DIRECT PLUG-IN
CLASS 2 TRANS
FORMER
1\P: 120V AC 60
HZ 5W
D/P 12V DC 150
mA
92
N5
LISTED
E100839
E100839
MODEL: 35-12-15
0C
E1A 172 9310 D
MADE IN CHIN
A
UL
LR 98553
CHARGE
LEVEL
FREQ.
ADJUST
DC 12V
AC Adapter (P)
Transmitter Power
Input Jack (K)
Input Jack (K)
Audio
Output Jack
Stereo Receiver
IN
OUT
L
Antenna
Fuse
R
L
R
L
R
Tape
Mon 1
Tape
Mon 2
Spkr
A
Spkr
B
Phono
L
R
CD
L
R
L
Aux
300
75
CHARGE
LEVEL
FREQ.
ADJUST
DC 12V
Transmitter
Audio
Output Jack
TV
IN
OUT
L
Antenna
R
L
R
Video 2
Stereo
L
R
Video 1
CHARGE
LEVEL
FREQ.
ADJUST
DC 12V
Transmitter
Headphone
Output Jack
Stereo Receiver
ON OFF
Headphone
CHARGE
LEVEL
FREQ.
ADJUST
DC 12V
Transmitter
Audio
Input Cable (M)
Input Cable (M)
Y Adapter Cable (Q)
Audio
Input Cable (M)
Input Cable (M)
Y Adapter Cable (Q)
Audio
Input Cable (M)
Input Cable (M)
Headphone
Adapter Plug (R)
Adapter Plug (R)