ProMaster 8026 Manual Do Utilizador

MIC-1 Electret Condenser Microphone 

The Vectra MIC-1 stereo microphone fits most digital video and DSLR cameras. This 

microphone offers more natural improved sound over what you will normally get with the mic 

built in to your camera or camcorder. Its high sensitivity and strong directional capability gives 

you superb clarity for subjects that are further away. The Vectra MIC-1 offers a selectable pick- 

up pattern to get the best sound depending on the scene you are recording. 

 

  The microphone is a sensitive precision instrument. DO NOT subject it to impact or 

excessive vibration. Keep it away from high temperatures and humidity. 

  If the microphone is operated near an amplifier you will experience feedback. If this 

happens, move the microphone away from the amplifier or turn down the volume of the 

amplifier. 

  Changing the mode switch while recording will cause the switch noise to be recorded. 
  If the windscreen gets wet from rain or other sources, it should be dried in a cool, dry 

place. Avoid drying in direct sunlight to prevent deterioration of the foam. 

 

  MIC-1 Electret Condenser Microphone 
 Wind 

Screen 

 CR2 

battery 

 Storage 

bag 

 Instruction 

Manual 

 

1. 

Push the battery cover backward and lift off. 

2. 

Push the battery towards the front of the microphone to remove. 

3. 

Put the new battery into the battery compartment. Be sure to observe the correct polarity. 

4. 

Replace the battery cover and slide into place.