PoGo Products PPF100M4 Manual Do Utilizador

2.4.2  The last contents loaded from memory will load and play upon next boot-up 

via the remote control. 

2.5 

 

 

2.5.1  If you want to store all contents of the memory card to internal memory, press 

the “STORE” button at Home menu. 

2.5.2  If you want to store photo, music, or movie groups from memory card to 

internal memory, press the “STORE” button at Photo list, Music list, or Movie

 

list of memory card. 

2.5.3  If you want to store one or more files from memory card to internal memory, 

press “OK” when highlighting a file(s) at folder menu, then press “STORE.”   

2.6 

  Dimming control

: The dimming control will control the brightness of picture. 

2.7 

  Ready mode

: The Photo Frame will enter Ready mode when being powered off 

via the remote control’s Power button.    Pressing the Power button on the remote 

will take Photo Frame out of Ready mode. 

2.8 

  Control button

: The control buttons on top of the Photo Frame controls all 

functions. 

2.9 

  Photo sensor

: Photo sensor will

 

sense the room light condition and 

automatically adjust the picture brightness. 

2.10 

  PC connection by USB cable: 

An optional USB adaptor cable (available 

directly from PoGo!) can be used to connect the Pholio to your PC for file 

transfers. By using the EXIF format application, you may add index and memos 

before download to Pholio. 

2.11 

USB device connection:

 The extension can also connect to a USB Flash 

memory or USB hard disk drive for additional storage of photos, music, and video, 

or to connect and download photos directly from digital still cameras. 

2.12 

: The cradle attaches to the Pholio via the multifunction connector and 

provides extra functions as follows; 

2.12.1  Mid-woofer sound for enhanced dynamics of music and allows the mid-

woofer volume to be controlled separately. 

2.12.2  Auto on/off control by detection of movement. If the sensors do not detect 

movement for 30 minutes, Pholio will shut off. 

2.12.3  USB slave to PC/USB host to USB memory device or digital still camera. 

These two connections provide same functions as PC & USB device cable 

connection (section 2.10). 

2.12.4   Video output to TV or monitor and stereo audio output to TV or audio amplifier. 

These A/V outputs can also be used for recording via VCR or camcorder. 

 

PPF100M4 Operating 

Instruction 

 

5