Pelco PelcoNet NET300 Multimedia Transmission Via Network C2908M-B Manual Do Utilizador

72

C2908M-B (4/05)

If no video or a distorted video image is displayed at the receiver during a connection to a transmitter:

•

Make sure to use the right unit for your application: a camera can only be connected to a transmitter, never to a receiver.

•

Make sure the video input on the transmitter is properly terminated.

•

Make sure the camera is switched on and the coaxial cable is connected to the transmitter.

•

Check the camera cable and connect a video monitor to the camera to check that the camera is functioning correctly.

•

Make sure the monitor is switched on and the coaxial cable is connected to the NET300 receiver.

•

Check the monitor cable and the selection of the monitor channel if the monitor features more than one video channel.

•

(NET300R unit only.) Make sure the Output Standard field on the Video Decoder Settings page is set for the TV signal used in your region 
(NTSC or PAL). Restart the receiver if you have to change this field.