Roberts Radio 60-4357 Folheto

60-4357

One 9V battery for the transmitter (not included)
One 7.2V battery pack for the Dodge Raminator (not included)  

• Turn the truck off.
• Lift the two latches on the back of the truck to 

open the battery compartment cover.

• Attach the battery pack’s connector to the 

vehicle’s connector. Do not force them 
together. They fit one way only. Place the 
connectors in the space inside the compart-
ment and place the battery pack in the com-
partment. Be sure the wires do not touch any 
moving parts.

• Replace the cover and secure the tabs.

• Press OPEN on the battery compartment cover and slide 

it off.

• Insert one 9V battery in the battery compartment, match-

ing the polarity symbols (+ and -) as marked inside.

• Replace the cover and snap it on.

• Turn the Dodge 

Raminator on. The 
headlights illuminate

• Use the transmitter’s 

controls to drive and 
steer the truck.

• When you finish driving 

the vehicle, turn the 
transmitter and vehicle 
off.

• Push to the left to turn left.
• Push to the right to turn right.
• Release to go straight.

Route the antenna wire’s loose end through the supplied plastic tube and insert the tube 
securely into the truck’s antenna tube holder.

• Push forward to move forward. For turbo speed, push forward and to the right.
• Pull backward to move backward.
• Release to stop.