Tyco Electronics 0-1591046-X Manual Do Utilizador
16 Port Ethernet Switch With Optional Fiber Port
Tyco Electronics
Page 2
Features
16 x Auto-sensing 10/100Base-T RJ-45 Ethernet ports
1 x Option slot for 100Mbit/s fiber uplink module that
1 x Option slot for 100Mbit/s fiber uplink module that
operates over distances of up to 2Km (multi-mode) or
15 Km (single-mode) fiber
15 Km (single-mode) fiber
1 x Additional 10/100Mbit/s RJ-45 port for uplinking
Meets IEEE 802.3, .3u and .3x Ethernet standards
Meets IEEE 802.3, .3u and .3x Ethernet standards
Local management using an RS232 console port
Management enables detailed control of each port
Support for port-based VLANs and Port Trunking
Uses store-and-forward switching to separate collision
Management enables detailed control of each port
Support for port-based VLANs and Port Trunking
Uses store-and-forward switching to separate collision
domains and abnormal packet filtering
Integral 8K MAC address table automatic learning
Backplane bandwidth up to 3.2Gbit/s
Supports back-pressure & flow control
Numerous diagnostic LED indicators
Internal AC/DC power unit
Stand-alone or mountable in 19” racking
FCC Class A, CE mark certification
Backplane bandwidth up to 3.2Gbit/s
Supports back-pressure & flow control
Numerous diagnostic LED indicators
Internal AC/DC power unit
Stand-alone or mountable in 19” racking
FCC Class A, CE mark certification
Technical Support and Service
If you require technical advice for these products, please see the
FAQ pages on the web address
FAQ pages on the web address
If you still have problems, please contact us using the support form
located on the above web site.
located on the above web site.
If you have a faulty unit then please contact us through the web
site to arrange for a replacement unit. The faulty unit must be
returned to us as part of the replacement agreement.
site to arrange for a replacement unit. The faulty unit must be
returned to us as part of the replacement agreement.