Technika BB-129I Manual Do Utilizador

Before docking your iPod you must first check if your iPod 
has a docking connector. Early iPod models do not have one 
and cannot be docked to your unit. The docking connector is 
located on the base of the iPod as shown below.

c

  iPod mini (4GB or 6GB)

d

  iPod, 4th gen. with a B&W display and clickwheel with 

legends on wheel (20GB or 30GB)

e

  iPod, 4th gen. with a B&W display and clickwheel with 

legends on wheel (40GB)

g

  iPod photo, with a colour display (40GB or 60GB)

h

  iPod nano 1st gen. with flat sides.

i

  iPod  video  5th  gen.  (30GB  or  60GB)  and  iPod  Classic 

(80GB or 120GB).

1)

  iPod video 5th gen. (80GB) and iPod Classic (160GB).

1!

  iPod nano 2nd. gen with round sides.

Other iPod models with dock connectors
Your iPod may have been supplied, packed with a standard 
dock adaptor. If so, this can be used as the docking bay on 
your unit is compatible with adaptors supplied by Apple.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor, 
you can buy one from Apple on-line.  To determine the exact 
model of your iPod, refer to this web-link - http://support.
apple.com/kb/HT1353.  You  can  then  browse  the  iPod 
accessories page on the Apple website to find an adaptor for 
your iPod model that can be purchased on-line.
Once you have located the correct adaptor for your iPod, press 
it gently into the iPod Docking Bay before attempting to dock 
your iPod.

If you own an iPod Shuffle, a model without dock connector 
or prefer to connect your iPod by cable, you can connect the 
sound output to the AUX IN jack on the top panel.

FINDING THE CORRECT iPod ADAPTOR
Your  iPod  docking  system  is  supplied  with  a  selection  of 
docking adaptors that are compatible with several models in 
the iPod range. Refer to the table of iPod models in the next 
column which lists the adaptor numbers (marked on the side 
of the adaptor), compatibility and instructions for obtaining 
an adaptor for unlisted models.
NOTE: Do not dock an iPod without fitting the correct adaptor, 
you may damage the iPod and your unit.

Using a 3.5mm stereo jack to jack cable (not supplied), 

•

connect one end of the cable to the headphone socket of 
the iPod, and the other end to the AUX IN jack on the top 
panel.
To listen to your iPod, follow the instructions on page 10 

•

for playing equipment connected to the AUX IN jack.

NOTE:- The volume control of the iPod must be turned up 
when playing through the AUX IN jack.
NOTE:-  An  iPod  connected  to  the  AUX  IN  jack  cannot  be 
operated from the remote control and will not be activated 
by the alarm.

Headphone socket

To the AUX IN jack

Docking Connector

iPod adaptor

Docking bay

Before docking your iPod, you must first remove the cover 
from the docking bay and fit the correct iPod adaptor.  Each 
iPod adaptor matches the shape of a particular iPod and is 
necessary  to  ensure  that  your  iPod  is  securely  held  when 
docked.