ONKYO CHAD Manual Do Proprietário

13

8. ChadEdit will now download the configuration into your USR-5. After

downloading, your USR-5 will tell you when it is ready to be used again by
beeping twice.

You can cancel the download at any time by clicking on the Cancel button, but doing so may result in a
corrupted configuration in your USR-5 (you can fix this by fully downloading a configuration).

It is best to not touch your USR-5’s screen or use any of your USR-5’s direct
access buttons, while downloading is in progress.

There are a number of ways to load a CCF into ChadEdit.

•

When ChadEdit is running.

1. Load a CCF into ChadEdit by doing one of the following

• drag a CCF and drop it on ChadEdit, or

• click on 

 in the toolbar or select Open Configuration... from the

File menu and select a CCF

2. ChadEdit now loads the selected CCF. If ChadEdit has a non-empty

current configuration, ChadEdit will ask you if you want to Merge with
current configuration or replace it?. If you decide to merge, ChadEdit
will add all home panels, devices and macro groups from the loaded
CCF to the current configuration. If you decide to replace, ChadEdit will
remove the current configuration (if it has been modified, you will first
be allowed to save it) and replace it with the configuration from the
loaded CCF.

•

When ChadEdit is not running.

1. Start ChadEdit and load a CCF by doing one of the following

• double click on a CCF, or

• drag a CCF and drop it on the ChadEdit icon