ONKYO CHAD Manual Do Proprietário

16

1. Open the panel view of the panel to which you want to add a button.

2. If the button and frame gallery is not visible, open it by clicking on 

 in

the toolbar or selecting Gallery from the Tools menu.

3. Select a group of frames and buttons by clicking on the group’s name in

the list on the left side of the gallery window. Alternatively, you can use the
cursor UP and DOWN keys to change the selection.

4. Click on the button you want to add, drag it to the panel view and drop it

where you want to add it. If the button you want to add is embedded in a
frame, clicking on that button will select the entire frame. Hold down a
SHIFT key while clicking on a button in the gallery to select only that button.

1. Open the panel view of the panel with the button you want to remove.

2. Select the button you want to remove by clicking on it. A red frame will

appear around the selected button.

3. Press the DELETE key.

1. Open the panel view of the panel with the button you want to move.

2. Select the button you want to move by clicking on it. A red frame will appear

around the selected button.

3. Hold down the left mouse button and move the cursor to drag the button to

a new location. The status bar shows the current location of the selected
button. Alternatively you can use the cursor keys to move the button. To
move it faster with the cursor keys, hold the SPACE bar at the same time.

1. Open the panel view of the panel with the button you want to copy.

2. If you want to copy a button to another panel, then open the panel view of

the panel to which you want to copy a button.

3. Hold down a CTRL key, click on the button you want to copy, hold down

the left mouse button and drag the button to the location to which you want
to copy it, and release the left mouse button to drop the dragged button.