Troy-Bilt CSV 060 Push Chipper Shredder Vac Manual Do Proprietário

1. 

Place nozzle/hose vac lever in the bottom position on the 

nozzle to redirect vacuum to the hose assembly. See Figure 

5-4.

2. 

The spring loaded pin must be in the second hole of the 

hose adapter to operate the hose assembly. See Figure 5-4.

3. 

Unhook the hose from upper and lower hose handle 

brackets and grasp the hose handle to guide the hose 

while vacuuming yard waste such as leaves or pine needles.

4. 

If necessary, attach the hose extension to vacuum in hard 

to reach places as follows:

a.  Insert round end of hose extension into end of hose 

assembly.

b.  Secure strap on hose extension to pin on hose 

assembly. See Figure 5-5.

Yard waste such as leaves and pine needles can be vacuumed 

up through the nozzle for shredding. After material has been 

shredded by the flail blades on the impeller assembly, it will be 

discharged into catcher bag. Do not attempt to shred or chip 

any material other than vegetation found in a normal yard (i.e. 

branches, leaves, twigs, etc.) Avoid fibrous plants such as tomato 

vines until they are thoroughly dried out. Materials such as stalks 

or heavy branches up to 1 1/2” in diameter may be fed into the 

chipper chute.
1. 

Place nozzle/hose vac lever in the top position on the 

nozzle to vacuum through nozzle. See Figure 5-3.

2. 

The spring loaded pin must be in the first hole (closest to 

the end of the tube) of the hose adapter to operate the 

nozzle vac. See Figure 5-3.

3. 

Place both hands on top of upper handle to push unit over 

yard waste.

Do not attempt to shred, chip, or 

vacuum any material larger than specified on the 

machine or in this manual. Personal injury or 

damage to the machine could result.

IMPORTANT: The flail screen is located inside the housing in 

the discharge area. If the flail screen becomes clogged, remove 

and clean as instructed in Maintenance & Adjustments. For best 

performance, it is also important to keep the chipper blade 

sharp.