KWC SUPRIMO Z.534.171.000 Folheto

The Standard KWC Product 

Warranty applies. 

 

 

 
 
 

 

1770 CORPORATE Dr.#580 

NORCROSS, 

GEORGIA 30093 

USA 

Tel: 678-334-2121. 

Fax: 678-334-2128. 

 
 

KWC AG. 

CH-5726 

UNTERKLUM, 

SWITZERLAND. 

Tel: 062-768-68-68. 

Fax: 062-768-61-62.

 

 

 
 

 
 

SUPRIMO 

LIQUID SOAP AND 

LOTION DISPENSER 

 

 

 
 

Z.534.171.000 – CHROME 

  Z.534.171.121–BRUSHED NICKEL 

Z.534.171.700–STAINLESS STEEL 

Z.534.171.734-SS/BLUE 

Z.534.171.736-SS/MATT-BLACK 

 

AN HYGIENIC AND ATTRACTIVE 

DISPENSER FOR SINKS, LAVATORIES AND 

COUNTERTOPS. IT IS EASILY INSTALLED 

WITH CONVENIENT TOP FILL. 

 

 

 

 

1. Either use an existing hole in the sink, lavatory or countertop, or prepare one specially. It should 

have a diameter between 25mm and 35mm (1” and 1 3/8”). The center of the hole should not be 
more than 100mm (4”) from the inside edge of the sink. The maximum thickness of the surface 
should not exceed 50mm (2”).  

2. Pass the CONNECTOR down through the hole from above with the WASHER immediately above 

the surface. Screw the NUT onto the CONNECTOR beneath the surface and tighten – hand tight is 
sufficient. If sink or countertop is not sufficiently thick to allow NUT to tighten, use large spacer 
washer provided positioned between NUT and underside of surface. 

3. Connect the bottle onto the lower end of the CONNECTOR by passing the 4 lugs inside the bottle 

neck. Push the BOTTLE firmly upwards until it clicks into position. 

4. The PUMP UNIT will already be assembled within the BODY. Push the TUBE into the lower end of 

the PUMP. 

5. Fill the BOTTLE through the CONNECTOR as shown below (a) (the BOTTLE holds 15 fl. Oz. And 

should not be overfilled), then place the assembled BODY,PUMP UNIT and TUBE into the 
CONNECTOR as shown below (b).

 

 

 
 

 

 
 

 
 
 
a)

 

Fill the bottle through the connector. 

 

     (b) Insert the body, pump unit and tube.