StarTech.com usb dual vga cat5 kvm console extender - 650ft/200m Manual Do Utilizador

Instruction Manual

14

(Blue)

(Green)

(Red)

Caps Lock LED Flashing
1. For both 1st and 2nd monitors 

     

1.1 Press        or         to coarse tune; 8 levels for adjustment

      1.2 Press and Hold Shift +         or        to fine tune

2.1 Press F1 or F2 to coarse tune; 8 levels for adjustment

       2.2 Press and Hold Shift + F1 or F2 to fine tune

       3.1 Press F5 or F6 to coarse tune; 8 levels for adjustment
       3.2 Press and Hold Shift + F5 or F6 to fine tune

[Esc] 

Escape from Video Adjustment Mode

Some of the keyboard command sequences you issue to the Remote Unit have 

multiple possible settings. The Unit will beep to indicate what setting you have 

selected for the command you issued. (A short beep followed by a long beep indicates 

an invalid command.) 
[Ctrl] - [Ctrl] - [Alt]+[E] (Compatibility Mode Selection)
1 beep: disabled (factory default)
2 beeps: enabled
Note: Commands described in the [Key] - [Key] format are keys that must be pressed 

in order on the keyboard. Commands described in the [Key]+[Key] format must be 

pressed simultaneously. 
Note: If the NumLock, CapsLock, and ScrollLock lights are flashing in unison on the 

keyboard, the other Unit has control of Computer A. You will not be able to use A until 

the other Unit releases access to that computer.