StarTech.com usb dual vga cat5 kvm console extender - 650ft/200m Manual Do Utilizador

Instruction Manual

1

Introduction

The SV565DUTPU USB Dual VGA KVM Console Extender over CAT5 UTP lets you 

Operate a Dual VGA PC or KVM switch up to 650ft  (200 m) away, as if it was installed 

locally, at high-definition 1920x1200 resolution. PC connection cables are included 

with this product for a ready to use solution.
The dual VGA Cat5 KVM extender supports easy to use hot-key and push button 

commands which allow you to switch between a locally connected system and your 

remote server or KVM, and works with virtually any standard USB keyboard and mouse 

including wireless sets. The hot-key commands also provide video adjustment controls 

for optimizing picture quality over varying distances. Extending over two standard 

Cat5 (or better) cables gives you the ability to use existing infrastructure wiring to 

achieve remote access to your server or KVM switch.
Backed by a StarTech.com 3-year warranty and free lifetime technical support.

•  Can be used with a single computer or connected to an existing dual-VGA KVM switch 
•  Easy installation using 2 industry-standard UTP network cables 
•  Intuitive hotkey commands 
•  Supports auto-switching between local and remote users or dedicated control 
•  USB computers are supported at the local and remote locations (USB keyboard and 

mouse required for remote console) 

•  Independently adjust video quality, inclusive of Equalizer (sharpness), Gain 

(brightness) and RGB skew

•  1 x integrated KVM cable each for the local and remote computers. Longer cables 

are available from StarTech.com, part numbers: SVECONx (PS/2), SVECONUSx (USB) 

•  2x unshielded Category 5/5e/6 twisted pair (UTP) straight-through network cable 

terminated at each end with RJ-45 connectors (if using surface cabling) 

OR
•  Unshielded Category 5/5e/6 twisted pair (UTP) straight-through network cable 

terminated at each end in two wall-mounted outlets, with two standard Category 

5/5e/6 patch cables, at both locations (if using premises cabling)