Crestron electronic CPC-2000A Manual Do Utilizador

Touchpanel with Dual Joysticks 

Crestron CPC-2000A

 

(Doc. 5682). Pinout notations are provided on these documents. The wiring 
documents can be obtained from the Downloads page (CABLES and MANUALS 
Libraries) of the Crestron website (

. Search for the 

CRESNET.PDF and MODULAR.PDF files.  

Refer to the hookup diagram below for proper connections of the  
CPC-2000A to the control system. Other than making the power connection last, 
complete the connection in any order.  

BACK PANEL VIEW OF CPC-2000A

THIS CONNECTION IS ONLY REQUIRED

WHEN LOADING YOUR VT PRO-E

PROJECT TO THE CPC-2000A OR

WHEN SETTING THE NET ID OF 

THE JOYSTICK.

PC

UNITS IN THIS ILLUSTRATION 

ARE NOT DRAWN TO SCALE.

CN-RJ11

SERIAL

PORT

CONTROL

SYSTEM

 

Each device and user interface within the network requires a unique identity code 
(NET ID). These codes are recognized by a two-digit hexadecimal number from 03 
to FE. The NET ID of the unit must match an identity code specified in the SIMPL 
Windows program.  

The CPC-2000A possesses two distinct identity codes; one code is for the 
touchpanel and the other is for the sensitivity adjustment knobs and joysticks which 
are treated as a network device. The NET ID of the touchpanel component is set to 
03. Refer to “Interface Menu” on page 9 for instructions on setting the touchpanel 
component of the unit’s identity code. For the knob/joystick component, the NET ID 
has been factory set to 30H, but may be changed from the PC via VT Pro-e or 
SIMPL Windows.  

The method for changing the unit’s NET ID is identical regardless of the software 
chosen. Attach the CPC-2000A to the control system (verify that the software is 
running) and complete the following steps to change the NET ID.  

1.  Disconnect all network devices from the control system, except for the 

one CPC-2000A that needs to have its NET ID changed.  

•  Touchpanel with Dual Joysticks: CPC-2000A