Electrolux OHV Manual Do Utilizador

36

37

1)  Remove spark plug wire from plug.
2)  Remove Chute Assy. See section 7.51
3)  Remove both 3/8

"

 screws that secure belt 

cover.  Remove belt cover.

4)  Place a chair or saw horse under handle for 

support after auger section is split.

5)  Remove both 9/16

"

 hex bolts that hold the 

powerhead and auger housing together.

6)  Remove belt from drive pulley as you 

separate the auger from the powerhead 
assembly

7)  Place new belt on auger pulley.
8)  Lift auger housing into position and ensure 

that slotted bracket on auger housing are 
placed onto the rod at base of powerhead

10)Reinstall bolts to secure auger housing to 

the powerhead.

11)Reinstall the belt cover and the chute 

assembly. ( See Section 7.51)

9)  Route auger belt around pulleys, checking 

that the belt does not catch on idler brkt.

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com