Cosmorex SE Manual Do Proprietário

Your Cosmorex camera is equipped with a built-
in self-timer. This trips the shutter after
a 10-second delay (approximate), thus enabling
you to get in your own photographs! To use it,
here's all you have to do:
1. Mount camera on a tripod or other firm

support such as a nearby table or shelf,
with transport lever fully wound.

2. Frame, focus, and adjust camera for correct

lens opening and shutter speed - exactly as
you always do.

3. Move Auto/Manual Switch (14) on lens to "M"

position (so the red "M" is visible).

This closes down the lens to the correct
aperture, and is required when the selftimer
is used.

4. Move Self-Timer Lever (10) counter-clock-

wise until no further movement is possible. (As
you move it, you'll notice the "M" sticker
underneath the Self-Timer Lever. This is simply
a reminder to move the lens to "M" [Manual]
position as described).

5. Press Self-Timer Release Button (9). You'll

hear a "whirring" noise, which indicates that
the timer is functioning. Now, walk away from
the camera into the scene being
photographed - the shutter will fire auto-
matically in about ten seconds.